Unit 1 in the room is the unit on the diagram: turn a valve on either side and both follow. Click a transmitter tag to find it in the room. Open full screen
Click any valve on the diagram and set its opening from 0 to 100 % with the slider. Click a transmitter to find it in the 3D compressor room.
One reliquefaction unit of an LPG / ethylene carrier: boil-off vapour from the cargo tank is drawn through a suction separator into a two-stage oil-free labyrinth piston compressor, compressed, condensed and returned to the tank as liquid.
Propane: the hot gas condenses against sea water. Ethylene: it cannot condense against sea water, so a propylene cascade cycle (screw compressor) cools the ethylene condenser.
Settings and trips follow a typical plant of this type. This is a training model, not your ship's control system: always follow your plant's operation manual.