Meklēšana rokasgrāmatās
ΔP alarmAlfa Laval Moatti L280, bojājums, 14. lpp.Insert clogged by dirt or sludge. Start troubleshooting at once; clean the insertSludge dosage valve does not startTeamTec Golar OG 200, bojājums, 45. lpp.Circulating pump off, chamber below 600 °C, relay, inverter or motor fault. Start the pump, check AL setting and temperature, relays d9/d10, inverter and motorSludge dosage valve stops after a whileTeamTec Golar OG 200, bojājums, 45. lpp.Chamber temperature falls (wet sludge) or motor overload (OL2 on inverter). Drain water from sludge, check the thermal overload settingNo flame from the sludge burnerTeamTec Golar OG 200, bojājums, 46. lpp.Steam/air solenoid, low atomising pressure, too much water or air, damaged sludge nozzle. Check solenoid s7 and pressure, drain the tank or use position 1, reduce air, clean the nozzleLow sludge / steam pressure alarmTeamTec Golar OG 200, bojājums, 47. lpp.Sludge below 0.5–1 bar or steam/air below 6–9 bar, closed valves, faulty switches. Adjust supply pressures, open valves, check switches b14 (0.2 bar) and b21 (2 bar)Bowl does not reach rated speed or takes too longWestfalia OSA 7, bojājums, 58. lpp.Brake on, wrong motor connection, oily or worn clutch shoes, too few shoes, bowl rubbing the centripetal pump, sludge in upper frame, worm wheel slipping. Release brake, check wiring, dry or renew clutch shoes, add shoes, reset bowl height, clean the frame, tighten worm wheel clamp screwsTeamTec Golar OG 200Kuģa sadedzināšanas iekārta (eļļas dūņas, notekūdeņu dūņas un cietie atkritumi), 46. lpp. … SLUDGE BURNER 3
(Sludge dosage valve
running)
Faulty sludge dosage valve:
Check dosage valve.
(Stator and rotor).
Sludge … TeamTec Golar OG 200Kuģa sadedzināšanas iekārta (eļļas dūņas, notekūdeņu dūņas un cietie atkritumi), 45. lpp. … 10
SLUDGE DOSAGE Sludge circulating pump is | Check pump.
VALVE DOES NOT not running.
START
(Selector switch "Sludge … TeamTec Golar OG 200Kuģa sadedzināšanas iekārta (eļļas dūņas, notekūdeņu dūņas un cietie atkritumi), 35. lpp. … SLUDGE BURNER AUTO
Prior to buming of sludge, heat up the sludge and drain off water from sludge … Hamworthy Super Trident ST6ABioloģiskā notekūdeņu attīrīšanas iekārta, IMO MEPC.2(VI), 52. lpp. … In this way the small
quantity of sewage sludge will be mixed with waste oil and incinerated without … Hamworthy Super Trident ST6ABioloģiskā notekūdeņu attīrīšanas iekārta, IMO MEPC.2(VI), 53. lpp. … Incinerator sludge tank
H.
Engine room sludge transfer pump
J.
Engine room sludge tank
K.
Alternative desludging. Metered … Westfalia OSA 7Pašattīrošs centrbēdzes eļļas separators (smēreļļas attīrītājs), 33. lpp. … De-sludge the bowl: see 2.3.3.1, No. 3.
Flush bowl with oil and de-sludge … Westfalia OSC 4Pašattīrošs centrbēdzes eļļas separators, 50. lpp. … De-sludge the bowl: see 2.3.3.1, No. 3.
Flush bowl with oil and de-sludge … Westfalia OSA 7Pašattīrošs centrbēdzes eļļas separators (smēreļļas attīrītājs), 32. lpp. … To avoid impaired separating efficiency,
the separating time should, however, not be extended until the sludge
space is … Westfalia VESC-1Separatora vadības bloks, 16. lpp. … LSL sludge tank level switch
In the case of optional Centripack modules with sludge tank, the sludge pump … Westfalia VESC-1Separatora vadības bloks, 1. lpp. … sludge tank level switches; outputs drive the feed, displacement/filling water and operating water valves, the sludge pump …