Answer the office from the manual, and practise in a 3D compressor room
SeaVint is a web app for seafarers and ship managers built around the maker's manuals. These are the newer parts of it: two assistants for the messages that land on board every day, a walk-through 3D cargo compressor room and a process simulator that anyone can open for free.
- Reply from a manual
- Parts requests
- Cargo compressor room in 3D
- Cargo compressor room simulator
- LSA and FFA register
Reply from a manual
Paste any message you have to answer: a question from the office, a supplier asking you to confirm a part, a superintendent asking about an overhaul interval, a surveyor asking for a setting. SeaVint works out what the sender actually wants, finds it in the manual and drafts the reply, with the manual page for every fact.
It works with the manuals you upload for your ship and with any manual in the open SeaVint catalogue. Nothing is invented: what the manual does not give is left in the draft as a placeholder for you to fill in.
- Pick the manual, or let SeaVint search all the manuals you have.
- Paste the message, in any language.
- Read what the sender wants, the pages it found and the draft reply. Edit and send it yourself.
Parts requests
Paste an e-mail or a request for quotation from the office or a supplier, for example "kindly revert drawing with dimensions". SeaVint finds the requested items in the vessel's manuals: the parts list, the drawing or plate, the specifications and the page numbers.
It flags obvious mismatches, such as a part number that is not in the manual or a quoted safe working load below the equipment's own, drafts the reply and gives a PDF with just the manual pages you need to attach.
- Upload the manuals of the vessel (or use the open catalogue).
- Paste the request.
- Check the items it matched, the warnings and the draft; download the PDF of the pages and attach it.
Cargo compressor room in 3D
A walk-through cargo compressor room of a gas carrier: two reliquefaction units with piston cargo compressors and propylene cascade screw compressors, suction separators, interstage drums, condensers and receivers. Every valve opens by percent; transmitters show their trip set points and cables; the gastight bulkhead, ventilation, gas detection and the airlock are in place.
It runs in the browser, free and without an account. Built as a typical layout from the cargo compressor makers' manuals, not a copy of any particular ship.
Cargo compressor room simulator
Run one reliquefaction unit of an LPG / ethylene carrier: start the ventilation, the sea water and the two-stage labyrinth piston cargo compressor, open and close every valve and watch vapour, hot gas and condensate flow.
Live transmitters, alarms and shutdowns, the propylene cascade for ethylene, signal cables to the control rack, and failure scenarios up to what happens when every protection is defeated. Free, in the browser, no account needed.
LSA and FFA register
A register of the ship's life-saving and fire-fighting appliances and GMDSS equipment: every item with its quantity, expiry or service date and inspection interval. Overdue, expiring and defective items are highlighted; routine inspections are ticked with a phone at the item through its QR label, and the status prints for the master and port State control. It starts from a typical SOLAS list that you edit to match your own ship's plans.
The free printable checklists cover the monthly LSA and fire-fighting equipment inspections and the weekly lifeboat check.
Free without an account
- Open equipment catalogue — Maintenance procedures, service intervals, fault codes with causes and remedies, and spare part numbers, each with the page in the maker's manual.
- Spare part numbers — Part numbers from makers' manuals, each with its machine, name and manual page.
- Interactive 3D models — Turn, take apart and click any part to see its name, number and the page in the manual.
- Checklists — Printable bridge, deck, engine room and safety checklists.
- Calculators — Pt100, 4–20 mA, pressure units, insulation resistance, fuel density and VCF, ETA, squat, tides.
- Dictionary — Deck and engine room terms in 9 languages.
Questions
How do I answer a spare parts request from the office?
Identify the machine from its name plate (maker, model, serial number), find the part in the parts list of the maker's manual and give the part number with the drawing or plate number, the item number, the quantity and the manual page; attach a copy of that page. SeaVint's Parts requests does the search and drafts the reply from your manuals; you check it and send it.
Does SeaVint make up answers?
No. Replies are drafted from the manual pages it finds, and every fact carries its page. When the manual does not give something, the draft keeps a placeholder for you to fill in instead of guessing.
Which manuals can it use?
The manuals you upload for your ship or fleet (visible only to your company) and the manuals of the open SeaVint catalogue.
Is it free?
The catalogue, 3D models, checklists, calculators and dictionary are free without an account. Reply from a manual and Parts requests work on the free plan within its monthly number of AI questions; paid plans raise the limits. You can also try them in the demo without signing up.
Do I need to install anything for the 3D compressor room or the simulator?
No. Both run in a web browser on a computer, tablet or phone.
See pricing for the plans and their limits.