Separator runs unevenly / vibrates
Westfalia OSA 7, samooczyszczająca wirówka oleju (oczyszczacz oleju smarowego)
Możliwa przyczyna
Uneven sludge, wrong assembly or mixed bowl parts, slack disc stack, damaged bowl, weak neck bearing springs, broken bottom bearing spring, worn gear
Co robić
Instrukcja producenta, s. 59Stop and brake without de-sludging; clean and reassemble correctly, add a disc, renew springs, renew worm and worm wheel together
Inne usterki Westfalia OSA 7
Bowl does not reach rated speed or takes too longBrake on, wrong motor connection, oily or worn clutch shoes, too few shoes, bowl rubbing the centripetal pump, sludge in upper frame, worm wheel slippingBowl reaches speed in under 2 minutes, high starting currentToo many clutch shoesBowl fails to closeClogged feed ducts or discharge nozzle, dirt in opening chamber, damaged gasket in sealing-chamber bottomBowl does not open or opens only partlyToo little operating water, clogged strainer, leaking line, dirt between piston and bowl, loose polyamide gasketIncomplete de-sludgingBowl closed too soon, hardened solids, enlarged piston discharge hole, slack disc stackBowl opens by itself after long separationOperating water in the sealing chamber evaporatedDirty oil at the clean oil outlet (bowl overflow)Rust and heavy impurities in the distributor neckOil in the water dischargeRegulating ring too largeWater in the clean oilRegulating ring too small
Na podstawie instrukcji producenta „NEW ME L.O PURIFIER MANUAL.PDF”. Przed pracą sprawdź oryginał na statku.
Strona przetłumaczona automatycznie. Numery części, kody i strony są jak w oryginale.