Oil in the water discharge
Westfalia OSA 7, separator centrifugal autocurățitor (purificator de ulei de ungere)
Cauză posibilă
Regulating ring too large
Ce trebuie făcut
Manualul producătorului, p. 40Fit a smaller regulating ring
Alte defecte Westfalia OSA 7
Bowl does not reach rated speed or takes too longBrake on, wrong motor connection, oily or worn clutch shoes, too few shoes, bowl rubbing the centripetal pump, sludge in upper frame, worm wheel slippingBowl reaches speed in under 2 minutes, high starting currentToo many clutch shoesSeparator runs unevenly / vibratesUneven sludge, wrong assembly or mixed bowl parts, slack disc stack, damaged bowl, weak neck bearing springs, broken bottom bearing spring, worn gearBowl fails to closeClogged feed ducts or discharge nozzle, dirt in opening chamber, damaged gasket in sealing-chamber bottomBowl does not open or opens only partlyToo little operating water, clogged strainer, leaking line, dirt between piston and bowl, loose polyamide gasketIncomplete de-sludgingBowl closed too soon, hardened solids, enlarged piston discharge hole, slack disc stackBowl opens by itself after long separationOperating water in the sealing chamber evaporatedDirty oil at the clean oil outlet (bowl overflow)Rust and heavy impurities in the distributor neckWater in the clean oilRegulating ring too small
Din manualul producătorului „NEW ME L.O PURIFIER MANUAL.PDF”. Înainte de lucru, verifică originalul de la bord.
Pagina a fost tradusă automat. Codurile de piese, codurile de eroare și paginile sunt ca în original.