Chapter 7. Maritime security
6 questions with how to answer each.
7.1.1 Security threat and risk assessment during passage planning Rotational 1
Is a security threat and risk assessment built into voyage planning, and does the passage plan include security information for every leg?
In one lineEach leg of the passage plan has a security risk assessment with high-risk areas, reporting points and the measures to be taken.
- Explain that the Master and the navigating officer assess the security threat for each leg using company advisories, flag and industry guidance (BMP, regional notices) and the CSO's input
- Show where the passage plan marks the high-risk areas, the voluntary reporting areas, the reporting points and contacts, and the planned timing (for example daylight transit)
- Describe the measures added for each risk level: extra lookouts, hardening, citadel readiness, speed and routing, and communication checks
- Explain how the assessment is updated during the voyage when the threat level changes
- Mention registration with the relevant reporting centres and the regular position reports
- Passage plan with security annotations
- Voyage security risk assessment
- Current BMP and regional security guidance
- Company security advisories and CSO instructions
- Records of registration and reports to the reporting centres
7.2.1 Vessel hardening Rotational 2
When the ship is heading into higher-risk security areas, do the Master and officers know the company's hardening procedures, and is a Vessel Hardening Plan available?
In one lineHardening follows the VHP before high-risk areas, with recorded checklists, physical barriers, a ready citadel and crew who know their roles.
- Explain when hardening is required, for example before entering a high-risk or voluntary reporting area as set by the risk assessment
- Describe the measures: razor wire or barriers at likely boarding points, doors and hatches locked from inside, ladders removed, lighting, water spray or hoses, and a citadel prepared with communications, water and food
- Show the hardening checklist and records from the last transit
- Explain your own role in the hardening plan and in the citadel muster
- Explain that the confidential parts of the SSP are not shown, but the evidence of implementation is
- Vessel Hardening Plan or the relevant non-confidential pages
- Hardening checklists and photos
- Citadel and its equipment
- Security drill records
- Voyage risk assessment
7.2.2 Controlling access to the vessel Rotational 1
Do the Master, officers and ratings know the company procedures for controlling who boards the ship in port and for keeping visitors safe, and are these procedures followed in practice?
In one lineCheck ID and purpose, log and badge every visitor, brief them on safety, and step up searches and controls with the security level.
- Describe how you control access: identify every person, check that the visit is expected, log names and times, issue a pass, and escort or direct them
- Explain how the controls increase at higher security levels, for example searching baggage and stores and limiting access points
- Explain the visitor safety brief: emergency signals, muster point, smoking rules, no mobile phones in hazardous areas, PPE, and accompaniment
- Explain what you do if someone refuses identification or a search: deny access and inform the OOW and the SSO
- Show how the gangway is rigged safely and checked
- Gangway visitor log
- Visitor passes and safety card
- Ship Security Plan access control sections (non-confidential parts)
- Gangway watch instructions
- Declaration of Security, if issued
7.3.1 Ship security reporting and communications Rotational 2
Do the Master and officers understand the regional security reporting schemes and how to use the Ship Security Alert System, and has the SSAS been tested at regular intervals?
In one lineSSAS is a covert alert ashore, tested with prior notice; know your regional reporting centre and the CSO's 24-hour number.
- Explain that the SSAS sends a covert alert ashore to the company and the Administration, that it gives no alarm on board, and that there are at least two activation points, one of them on the bridge (do not reveal the locations to others)
- Describe the test procedure: advance notice to the CSO or recipients, the test mode, confirmation of receipt, and the record
- Explain the LRIT system, which automatically reports the ship's position to the flag, and any stand-alone security communication equipment
- Explain the regional reporting: initial, daily and final reports to UKMTO, MDAT-GoG or ReCAAP as applicable
- Give the CSO 24-hour contact details from memory or show where they are posted
- SSAS test records and the acknowledgment from shore
- Regional reporting forms and the contacts list
- CSO and company emergency contact list
- LRIT conformance test report
- GMDSS and radio log
7.4.1 Ship Security Officer (SSO) Rotational 2
Does the Ship Security Officer hold a valid Certificate of Proficiency and fully understand the role, and are the security records of port calls kept as SOLAS requires?
In one lineSSO holds a VI/5 certificate, knows the SSP and contacts, keeps last-ten-port-call and drill records; crew know the alarm response.
- As SSO, explain your duties: implementing the SSP, security inspections, drills, training, maintaining security equipment, liaising with the CSO and the PFSO, and keeping records
- Show the records of the last ten port calls and their security levels, and any Declarations of Security
- Explain drill and exercise frequency (drills at least every three months; exercises at least once each calendar year, with no more than 18 months between them)
- As a rating, describe your response to a security alarm: the signal, the muster point, locking doors, and reporting what you see
- Explain how security equipment is tested and recorded
- SSO Certificate of Proficiency
- Ship Security Plan (non-confidential parts)
- Security records: port calls, DoS, drills, training
- Crew security training certificates
- Security equipment test records
7.5.1 Cyber security risk management Rotational 1
Do the Master and officers know the company procedures for managing cyber security risks, and have those procedures actually been put into effect on board?
In one lineKeep an IT/OT register, approve and log external access, scan all USB media, train the crew, know critical system back-ups.
- Show the register of IT and OT systems, such as ECDIS, the propulsion control, the cargo control system and the bridge equipment, with the owner and the risk level
- Explain how external access is approved: written approval, supervision of the technician, a time limit and a record
- Explain how USB sticks and laptops are scanned on a dedicated malware-check computer before being connected to any ship system
- Describe the back-up arrangements: standby ECDIS or paper charts, manual steering, local engine control, and recovery procedures
- Explain the user account and password rules, and how to report a suspected cyber incident to the company
- IT/OT system inventory
- Remote and local access approval records
- Cyber training records
- Back-up and recovery procedures
- Malware scanning station and its log
- The company cyber security procedure in the SMS
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.