Weekly emergency generator test

Starting, running and checking the emergency generator and its switchboard.

1. Fuel tank level sufficient for the required running time; lube oil and coolant levels correct.
2. Starting batteries charged, or hydraulic / air starting pressure correct; second means of starting available.
3. Room ventilation open and heater or preheating working.
4. Start in automatic mode by simulating loss of main power, as allowed by the company procedure.
5. Engine starts and the breaker closes within 45 seconds; voltage and frequency correct.
6. Run on load where possible; check oil pressure, temperatures, leaks and exhaust colour.
7. Return to normal: main power restored, emergency generator stopped and left in automatic.
8. Test, running hours and any defect recorded in the log book.

Reference only. Follow your company's SMS procedures and the maker's manual. seavint.com/checklists/emergency-generator-test