High vibration or noise
Tanabe TASK, packaged na oil-injected screw compressor
Posibleng sanhi
Worn mounting rubbers, loose bolts, bearing damage
Ano ang gagawin
Manual ng gumawa, p. 37Replace rubbers, retighten, replace bearings
Tingnan ang assembly sa 3D model
Iba pang sira ng Tanabe TASK
Does not start or stops at onceControl panel fault, low voltage, thermal relay trippedAir receiver safety valve blowsUnloader pressure switch, unloader valve or solenoid faultSeparator safety valve blows (high oil pressure)Clogged separator cartridge, minimum pressure valve faultPressure does not rise (stays unloaded)Pressure switch, solenoid or unloader seal ring faultOverheat tripDirty cooler, low oil, fan stopped, blocked intake, thermo valve faultOil flows back to suction filter at stopUnloader solenoid fault or stop delay relay wrongHigh oil content in airClogged separator cartridge, blocked return line, overfilling
Mula sa manual ng gumawa na “EM-20-3 INSTRUCTION MANUAL FOR AIR COMPRESSOR”. Suriin ang orihinal sa barko bago magtrabaho.
Awtomatikong isinalin ang pahinang ito. Ang part number, code at pahina ay ayon sa orihinal.