ERR 2 — clock failure (JOWA SEAGUARD): što učiniti?

Q: ERR 2 — clock failure (JOWA SEAGUARD): što učiniti?

Uzrok: Hardware failure. Što učiniti: Switch off, remove the battery from the control unit for 24 h, switch on, set GMT time and date, refit the battery; otherwise replace the CPU board

ERR 2 — clock failure

JOWA SEAGUARD, alarm kaljuže 15 ppm (ows monitor)

Mogući uzrok

Hardware failure

Što učiniti

Switch off, remove the battery from the control unit for 24 h, switch on, set GMT time and date, refit the battery; otherwise replace the CPU board

Priručnik proizvođača, str. 22

Pogledajte sklop na 3D modelu

Ostali kvarovi JOWA SEAGUARD

ERR 4 — memory errorMemory card loose or faulty (corroded contacts)ERR 8 — sensor not connectedBroken/loose cable or faulty sensor ERR 10 — sensor cleaning requiredNo clean water, dirty sensor, failed auto-flush, air bubbles, faulty sensor ERR 20 — sensor temperatureTemperature outside +1…+60 °C or faulty sensor ERR 40 — log truncatedLog recording interrupted by power failure ERR 80 — unknown errorSoftware failure or no ID in the Information menu PPM: O/R — out of rangeValue outside 0–30 ppm, sample too dirty, faulty sensor

Prema priručniku proizvođača „Manual JOWA SEAGUARD”. Prije rada provjerite izvornik na brodu.

Stranica je automatski prevedena. Brojevi dijelova, kôdovi i stranice su kao u izvorniku.