Caută în manuale
Atlas Copco MAS GA 18Compresor cu șurub injectat cu ulei, p. 83 … 4
Unscrew the oil filler plug only one turn to permit any pressure in the system to escape … Atlas Copco MAS GA 18Compresor cu șurub injectat cu ulei, p. 90 … Depressurize the system by unscrewing filler plug (FC) just one turn to permit any pressure
in the system … Tanabe VLHH-64A / 74ACompresor cu piston în V, trei trepte, răcit cu aer, p. 6 … GET TO WORK AFTER,
RELEASING PRESSUNE.
CAUTION FOR BURN
AVOID DIRECT TOUCH.
na.
GET TO WORK AFTER
‘SUFFICIENTLY … Tanabe TASKCompresor cu șurub injectat cu ulei, în carcasă, p. 3 … When you check or replace the rotating parts and work
there, be sure to stop the air compressor … MAN B&W L23/30H — informații tehniceMotor diesel auxiliar în patru timpi (grup electrogen), p. 74 … A brief description of the work.
3.
Reference to work, which must be carried out,
if any, before … Tanabe LSHC-20B/30A/40ACompresor cu piston în două trepte, răcit cu aer (aer de avarie / de serviciu), p. 19 … The features of this valve are such that
suction and delivery valves are mounted
coaxially to permit them … Senzori MeiyoSenzori de temperatură și presiune pentru sistemul de alarmă, p. 29 … operated in wet places.
(4) Be sure to turn off the power before starting inspection or repair work.
Senzori MeiyoSenzori de temperatură și presiune pentru sistemul de alarmă, p. 20 … work.
(3) Do not perform live-line work, except as required in
emergency.
Especially, pay special attention to … Tanabe TASKCompresor cu șurub injectat cu ulei, în carcasă, p. 5 … Do not touch them to avoid getting burnt.
When you work near the above hot area, be sure … Atlas Copco MAS GA 18Compresor cu șurub injectat cu ulei, p. 7 … adequately purified according to the
applicable legislation and standards.
5. Before any maintenance, repair work, adjustment or any … MAN B&W L23/30H — fișe de lucruMotor diesel auxiliar în patru timpi (grup electrogen), p. 133 … 2)
Mount the supporting devices for the valve
spindle heads on the work table.
Or as an alternative … TeamTec Golar OG 200Incinerator naval (nămol de ulei, nămol de ape uzate și deșeuri solide), p. 27 … Any accidents that may happen as result of operation, maintenance work,
or otherwise must be reported to us … Atlas Copco CD 25+…260+Uscător de aer cu adsorbție (regenerare la rece), p. 7 … adequately purified according to the
applicable legislation and standards.
6. Before any maintenance, repair work, adjustment or any … Unitor — echipament de sudurăEchipament naval de sudură și tăiere, p. 26 … 1 AC AND 2 OX 61-00-002
TERMINATION OF WORK
The torch is normally extinguished by first … Hamworthy Super Trident ST6AStație biologică de tratare a apelor uzate, IMO MEPC.2(VI), p. 63 … A shim is fitted at
the bottom of the impeller hub to permit the running clearance to be … Alfa Laval Moatti L280Filtru manual de ulei de ungere pentru motoare diesel, p. 6 … work. temperature
Alfa Laval Moatti snc® a
LES CLAYES SOUS BOIS - FRANCE [
1GX-001B 1SB-045
FAILURE TO … Tanabe TASKCompresor cu șurub injectat cu ulei, în carcasă, p. 4 … GET TO WORK AFTER RELEASING
——;_- 7
PRESSURE.
WARNING FOR RESPIRATORY LESION
COMPRESSED AIR SHOULD NOT BE
ZY WARNIG … Alfa Laval Moatti L280Filtru manual de ulei de ungere pentru motoare diesel, p. 38 … This information can also be used to assist in ordering spare parts on
the enclosed order form.
7 … Westfalia OSC 4Separator centrifugal de ulei autocurățitor, p. 18 … Maintenance and repair work may only be carried out by the customer to the extent
as described in … Unitor — echipament de sudurăEchipament naval de sudură și tăiere, p. 79 … After finishing the work, release the pressure in the
Pipelines and the hoses by closing the cylinder valves … Nakakita — comandă hidraulică a valvelorComandă hidraulică la distanță a valvelor, p. 75 … Turn the air
source (operation pressure) to Off, and execute the work.
(3) In case the actuator is … Nantong QN6004Mașină combinată: strung / burghiu / freză / raboteză, p. 47 … handle
NUT by ; >) 14(Fig.11)
W on work table
-@- ~ 9(Fig.2)
T UJ .
TRIANGLE connect motor … Alfa Laval Moatti L280Filtru manual de ulei de ungere pentru motoare diesel, p. 18 … It will give the possible reasons for
the problems and actions to solve them.
The chapter is divided … Westfalia OSA 7Separator centrifugal autocurățitor (purificator de ulei de ungere), p. 27 … If the oil company does not permit the addition of water, then the
purifier bowl is to be … Westfalia OSC 4Separator centrifugal de ulei autocurățitor, p. 20 … may only be used for work routines
as described in this instruction man-
ual.
Do not use damaged … Atlas Copco CD 25+…260+Uscător de aer cu adsorbție (regenerare la rece), p. 10 … A warning sign bearing a legend such as "Work in progress - do not start" shall be attached
to … MAN B&W L23/30H — fișe de lucruMotor diesel auxiliar în patru timpi (grup electrogen), p. 130 … to keep the bearing cap in
place when the guide bearing stud nuts are removed.
7)
Work the … MAN B&W L23/30H — fișe de lucruMotor diesel auxiliar în patru timpi (grup electrogen), p. 136 … to keep the bearing cap in
place when the main bearing stud nuts are removed.
7)
Work the … Tanabe VLHH-64A / 74ACompresor cu piston în V, trei trepte, răcit cu aer, p. 28 … OPERATION
5.1 Inspection before Starting the Operation
1) Be sure to check the following items before starting … Nakakita — comandă hidraulică a valvelorComandă hidraulică la distanță a valvelor, p. 49 … Jurn the air
source (operation pressure) to Off, and execute the work.
(3) In case the actuator is … Nakakita NS286Comutator de nivel magnetic cu flotor, p. 93 … Check the actuation and make the necessary wiring
work to the terminals.
Periodical Inspection
Carry out the following … Zhongde LYF2.0/300-0.7Căldare combinată (cu combustibil și gaze de evacuare), p. 34 … CuSn5Z2nPb
Spindle Brass/Cudn40Pb2
Handwhe} Steel
Nom.diam Work.pres Test.pres Max.temp.
mm kp/cm? kp … MAN B&W L23/30H — informații tehniceMotor diesel auxiliar în patru timpi (grup electrogen), p. 98 … The engine shall be prelubricated 2 minutes prior to
start, if there is not intermittent or continuous prelub … Hamworthy Super Trident ST6AStație biologică de tratare a apelor uzate, IMO MEPC.2(VI), p. 2 … Health and Safety Regulations appropriate to
this class of work.
2.
Work must only be carried out by … Senzori MeiyoSenzori de temperatură și presiune pentru sistemul de alarmă, p. 12| ON | OFF GLAND WORK [SPARE| TEMP(*C) | TEMP, (_m ) $D-S-L
| Pg … Unitor — echipament de sudurăEchipament naval de sudură și tăiere, p. 77 … Close the cylinder valves after finishing the work
, * Prior to disconnecting the high-pressure hose the
- cylinder valve … Nakakita NS286Comutator de nivel magnetic cu flotor, p. 1 … Bilge-well switches work through intrinsically safe switch-operated relays.