5.9.1 Lifting and rigging equipment procedures, maintenance and inspection
Rotational 1ChemicalLNGLPGOilAsked to: Chief Officer, 2nd / 3rd Officer, Chief Engineer, Engineer officers, RatingsWhere: Cargo Control Room, Engine Room, Interview - Rating, Main Deck
Do the Master, officers and ratings know the company procedures for lifting and rigging, and is there evidence that every item of lifting and rigging gear has been maintained, inspected and tested as the procedure requires?
In one lineEvery item in the register, marked with ID and SWL, certified and inspected; check before use and quarantine anything damaged.
How to answer
- Explain the markings each item must carry and show an example (SWL, ID, colour code)
- Describe pre-use checks: certificate and marking, visual check for wear, deformation, cracks, broken wires, correct shackle pin
- Show the lifting gear register and how items are linked to certificates and inspection dates
- Explain that damaged or unmarked gear is quarantined and removed, not used
- Explain how lifts are planned: load weight known, gear rated above it, banksman, tag lines, nobody under the load
What the inspector looks for
- Register/inventory of all lifting appliances and loose gear (slings, shackles, chain blocks, beam clamps, pad eyes) with unique ID
- Markings: SWL/WLL, ID number, certificate reference, inspection colour code where used
- Certificates and periodic thorough examination/test records for cranes, davits, overhead cranes and loose gear
- Pre-use checks by the user and removal of damaged gear from service
- Lifting plans/risk assessments for non-routine lifts
Have ready to show
- Lifting appliance and loose gear register
- Test certificates for loose gear
- Crane/overhead crane thorough examination reports
- Pre-use inspection records
- Quarantine area for condemned gear
- Lifting risk assessments
Avoid
- Unmarked or uncertified slings and shackles in use
- Register not matching items on board
- Damaged gear left in the store
- Lifting without a competent banksman
On SeaVint
← 5.8.7 Ballast and/or bunker pumproom safety inspection5.9.2 Spare parts for a single cargo hose handling crane →
Practise in the interview trainer All questions
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.