8.3.12 Portable ullage/temperature/interface (UTI) measurement and sampling equipment
Rotational 1ChemicalOilAsked to: Master, Chief Officer, 2nd / 3rd Officer, RatingsWhere: Cargo Control Room, Interview - Deck Rating, Main Deck
Do the Master and officers know the company procedures for using portable ullage, temperature and interface (UTI) gauges and sampling equipment, and is this equipment in good order and used as required?
In one lineCertified, calibrated UTI; pre-use checks done; bond first, then connect to the vapour lock; disconnect in reverse.
How to answer
- Explain the equipment on board and its intrinsic safety rating, and that only certified equipment is used.
- Explain the pressure rating of the vapour lock and sampling equipment and that it exceeds the tank operating pressure.
- Walk through the pre-use checks: tape and probe inspection, battery, function test in air and water, bonding cable intact.
- Demonstrate connecting the bonding cable first, then attaching to the vapour lock valve, and disconnecting in the reverse order.
- Explain how the equipment is cleaned after use and stored, and how calibration or comparison checks are recorded.
What the inspector looks for
- Intrinsically safe certification of the UTI tapes
- Pressure rating of vapour locks and sampling valves compared with tank pressures
- Pre-use checks: battery, tape/sensor condition, function test, bonding cable continuity
- Bonding to the ship before connecting to the vapour lock
- Calibration/verification records
Have ready to show
- Portable UTI tapes and sampling equipment
- Intrinsic safety certificates
- Calibration/verification certificates
- Vapour lock valves and their maintenance record
- Company SMS procedure for closed gauging
Avoid
- Bonding cable damaged or not connected
- UTI without valid certification or calibration
- Using equipment with a vapour lock rated below tank pressure
Practise in the interview trainer All questions
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.