8.3.14 Cargo tank venting systems
Rotational 1ChemicalOilAsked to: Master, Chief Officer, 2nd / 3rd OfficerWhere: Cargo Control Room, Main Deck
Do the Master and officers know the company procedures for operating, inspecting, testing and maintaining the cargo tank venting system, and is the system in good condition?
In one lineLift-check P/V valves before every operation, keep screens and drains clear, overhaul per PMS and record set pressures.
How to answer
- Explain the routine checks before each cargo operation: manual lift check of P/V valves, condition of flame screens, drains clear.
- Explain the overhaul and test interval in the PMS and show the latest records with set pressures.
- Describe how you deal with sticking valves, cargo residues or polymerising cargoes in vents.
- Explain precautions in freezing conditions.
- Show where any defect is reported and how operations are restricted until fixed.
What the inspector looks for
- P/V valves and high-velocity vents: free movement checks before operations, overhaul intervals
- Flame screens clean and intact
- Drains on vent lines kept clear of liquid
- Cold weather precautions against freezing
- PMS records and test certificates for the valves
Have ready to show
- PMS records for P/V valves and high-velocity vents
- Test certificates/bench test results with set pressures
- Pre-operation venting checklist
- Venting system diagram
- Defect reports
Avoid
- P/V valves seized or not checked before operations
- Damaged or clogged flame screens
- Overhaul overdue in the PMS
Practise in the interview trainer All questions
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.