SeaVint

8.4.3 Segregating incompatible cargoes and refrigerants

Rotational 2LPGAsked to: Master, Chief Officer, 2nd / 3rd Officer, Engineer officersWhere: Cargo Control Room, Compressor Room, Main Deck

During stowage planning, do the Master and officers follow the company procedure to find cargoes that must not mix with each other or with the reliquefaction refrigerant, and to keep them apart?

In one lineCheck cargo-to-cargo and cargo-to-refrigerant compatibility, segregate lines and plant, and document it in the plan.

How to answer

  • Explain how you use the compatibility chart for cargo pairs and for cargo against the refrigerant used in the reliquefaction plant.
  • Describe the physical segregation needed: separate piping and plant, blanks or removable spools, separate vent risers if required.
  • Explain material checks such as no copper alloy in ammonia service.
  • Show the stowage plan and the documented compatibility check approved by the Master.

What the inspector looks for

  • Compatibility chart for cargoes and refrigerants
  • Segregation of incompatible cargoes in separate tanks, lines, compressors and vent systems
  • Material compatibility (e.g. ammonia with copper and zinc alloys)
  • Refrigerant compatibility in case of condenser leaks

Have ready to show

  • Cargo/refrigerant compatibility chart
  • Stowage plan with compatibility check
  • Cargo system operation manual
  • Certificate of Fitness
  • Company SMS cargo planning procedure

Avoid

  • No compatibility check against the refrigerant
  • Incompatible cargoes sharing plant or lines
  • Officers unable to read the chart

Practise in the interview trainer All questions

An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.