SeaVint

8.6.16 Filling Limits (FL) and Loading Limits (LL)

Rotational 2LNGLPGAsked to: Master, Chief Officer, 2nd / 3rd OfficerWhere: Cargo Control Room

Do the Master and officers know the filling limits and loading limits for each cargo tank, and is this information readily at hand where cargo operations are controlled?

In one lineLoading limit is derived from the filling limit and density ratio at reference temperature; use the approved tables in every plan.

How to answer

  • Explain the difference: the filling limit is the maximum tank volume at the reference temperature (normally 98% under the IGC Code unless a higher limit is approved); the loading limit is the volume you may load at the loading temperature.
  • Explain that the reference temperature corresponds to the cargo vapour pressure at the relief valve set pressure, so the loading limit depends on that setting.
  • Show how the loading limit was calculated and applied in the last loading plan.
  • Show the approved tables in the CCR.

What the inspector looks for

  • Approved FL/LL tables for the cargoes carried
  • Understanding of reference temperature and how LL is calculated
  • Application in loading plans
  • Tables available in the CCR

Have ready to show

  • Approved FL/LL tables
  • Loading plan
  • Cargo System Operation Manual
  • Certificate of Fitness

Avoid

  • Tables not available in the CCR
  • Officers unable to calculate loading limit
  • Tank loaded beyond its loading limit

Practise in the interview trainer All questions

An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.