SeaVint

8.99.6 Stability and loading instrument(s)

Rotational 2ChemicalLNGLPGOilAsked to: Master, Chief Officer, 2nd / 3rd OfficerWhere: Cargo Control Room

Do the Master and deck officers know the company procedure and the maker's instructions for periodic testing of the loading computer / stability instrument, and are there records showing these tests were done as required?

In one lineTest the loading instrument with approved test conditions at the set interval, record it, and know how to check damage stability.

How to answer

  • Explain how the loading instrument is tested: enter the approved test conditions and compare results with the reference values.
  • State the test interval in the company procedure and show the records.
  • Demonstrate how to check damage stability in the instrument where approved.
  • Explain what you do if results are outside tolerance: stop using it, report, use manual calculations from the stability booklet.

What the inspector looks for

  • Periodic tests using approved test conditions from the stability booklet or the maker
  • Test results within tolerance and records signed
  • Ability to calculate damage stability where the instrument is approved for it
  • Software version and approval certificate

Have ready to show

  • Loading instrument test records
  • Approved test conditions
  • Loading instrument approval certificate
  • Stability booklet
  • Company SMS procedure

Avoid

  • Tests not done or not recorded
  • Officers unable to show damage stability
  • Unapproved software version

Practise in the interview trainer All questions

An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.