9.1.4 Mooring lines, tails and mooring shackles
Rotational 2ChemicalLNGLPGOilAsked to: MasterWhere: Documentation
Do all mooring lines, tails and joining shackles on board, including the spares, meet the industry guidance (MEG4)?
In one lineEvery line, tail, shackle and spare is certified, matched to the SDMBL as MEG4 requires, and in good condition.
How to answer
- State the ship's SDMBL and show that lines are chosen to match it in line with MEG4
- Explain that tails must be stronger than the line they are attached to, by the margin MEG4 sets, and that joining shackles are certified with a strength compatible with the tail and line
- Show the spares with their certificates and explain how they are stored
- Explain how line condition is inspected and when the LMP retirement criteria take a line out of service
What the inspector looks for
- Line strength matched to the ship design MBL (SDMBL) shown on the mooring arrangement plan
- Tails and joining shackles of the strength MEG4 requires relative to the SDMBL, and of a type suitable for the line
- Spare lines, tails and shackles certified, identified and stored protected from sunlight and chemicals
- No mixed materials in the same service; condition free of cuts, heavy chafe, glazing or UV damage
- Certificates traceable to each item
Have ready to show
- Mooring arrangement plan showing SDMBL
- Certificates for lines, tails and shackles
- Line Management Plan
- Spare line store
- Inspection records
Avoid
- Lines or tails weaker than the SDMBL requires
- Uncertified, wrong-type or non-matching joining shackles
- Damaged or uncertified spares
- Different line materials used in the same service
Practise in the interview trainer All questions
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.