Chapter 12. Ice operations
6 questions with how to answer each.
12.1.1 Polar Code training Rotational 2
If the ship trades in polar waters, have the Master, Chief Officer and navigating watch officers completed the extra polar training required by the Polar Code and STCW?
In one lineMaster and Chief Officer hold advanced polar training and watch officers basic training, matched to the ice conditions in the voyage plan.
- State which polar training each of you holds (basic or advanced) and show the certificates
- Explain that the level needed depends on the ice conditions in the voyage plan, as set out in the Polar Code and STCW
- Explain how the company checks the training before the ship is sent into polar waters
- Mention what the training covered: ice recognition, ship handling in ice, cold-weather hazards and POLARIS operational limits
- STCW V/4 polar training certificates
- Crew matrix showing polar qualifications
- Polar Ship Certificate
- Polar Water Operational Manual (PWOM)
12.2.1 Life-saving and fire-fighting systems and equipment in sub-zero temperatures Rotational 2
Do the Master and officers know the company procedures for keeping life-saving and fire-fighting equipment working in sub-zero temperatures, and are those procedures being followed?
In one lineDrain deck fire and foam lines, keep lifeboat engines heated and batteries charged, protect hoses and extinguishers, and de-ice LSA regularly.
- Explain the drain-down of the deck fire and foam lines: where the drain points are, when they are opened, and how the lines are refilled when needed
- Describe how hoses and extinguishers are kept from freezing (stowed inside, anti-freeze types or protected)
- Explain how to start a very cold lifeboat engine: keep the engine heater on, battery charged and warm, use winter-grade fuel, follow the maker's cold-start method
- Explain how ice is cleared from davits, release gear, liferaft cradles and escape routes
- Cold weather / winterisation checklist
- Fire main drain point locations
- Lifeboat engine heater and battery charger
- De-icing tools
- PWOM sections on LSA and FFA
12.3.1 Engine room machinery and systems in sub-zero temperatures Rotational 1
Do the Master and officers know the company procedures for keeping engine room machinery and systems working in sub-zero temperatures, and are these procedures followed?
In one lineRecirculate warm water to sea chests, keep fuel above its pour point, heat emergency machinery spaces and manage ventilation.
- Explain how sea chests are kept clear of ice: recirculating warm water, using the high sea chest, monitoring suction pressure
- Describe how fuel temperatures are kept above the pour/cloud point
- Explain how ventilation is reduced and heaters used without starving the engines of air
- Explain how the emergency generator and emergency fire pump are kept heated and tested
- Cold-weather checklist
- Sea chest recirculation arrangement
- Fuel tank heating records
- Emergency generator and fire pump test records
- PWOM engine sections
12.4.1 Cargo and ballast systems in sub-zero temperatures Rotational 2
Do the Master and officers know the company procedures for keeping cargo and ballast systems working in sub-zero temperatures, and are these procedures followed?
In one lineKeep ballast, vents, P/V valves and deck seal ice-free, drain deck lines and water spray, and record the cold-weather checks.
- Explain how ballast is kept from freezing (heating coils or circulation, avoiding partly filled tanks at the waterline in ice, checking air pipe heads and vents) and how this fits with the BWMS
- Explain how often P/V valves and vents are checked and de-iced, and why a frozen P/V valve is a risk to the tank structure
- Describe how deck lines are drained after cargo or ballast operations, and how valve actuators are kept working
- For oil and chemical tankers, explain how the deck seal is heated; for gas carriers, explain the water spray drain-down and the checks on cargo valves and relief valves for icing
- Cold-weather checklist
- Ballast system drawing and heating arrangement
- P/V valve inspection records
- Deck seal heating arrangement
- PWOM cargo and ballast sections
12.5.1 Deck machinery and mooring equipment in sub-zero temperatures Rotational 2
Do the Master and officers know the company procedures for keeping deck machinery, including mooring equipment, working in sub-zero temperatures, and are these procedures followed?
In one lineHeat the hydraulics, run the winches regularly, keep brakes and drums free of ice, and protect mooring lines.
- Explain how hydraulic systems are kept warm (tank heaters, circulating the oil, starting early before use) and why the oil grade matters
- Explain how often winches and the windlass are run, and how ice is cleared from brakes, drums, fairleads and rollers before mooring
- Explain that an iced brake or drum may slip, so brakes are checked after de-icing
- Describe how lines are protected: drum covers, stowed below where possible, and checked for ice damage
- Cold-weather checklist
- Hydraulic tank heaters and oil grade information
- Winch and drum covers
- PMS records
- PWOM sections on deck machinery
12.6.1 Navigating in areas affected by ice Rotational 1
Do the Master and officers know the company procedures for navigating in waters affected by ice, whether in polar regions or seasonal ice areas, and have they had suitable training for it?
In one linePlan with current ice information, stay within the ice class and POLARIS limits, reduce speed, double the lookout, and follow icebreaker instructions.
- Explain how ice information is obtained and put into the passage plan, and how the route is chosen to avoid heavy ice
- State the ice class and its limits, and explain how POLARIS is used to decide whether operation in the forecast ice is acceptable
- Describe navigation in ice: reduced safe speed, extra lookouts, radar and searchlights, trim and draft to protect the propeller and rudder, and watching for ice accretion
- Describe working with an icebreaker: communications, keeping the ordered distance and speed, and readiness to stop
- State the training you have had and the related company familiarisation
- Ice navigation procedures and the PWOM
- Current ice charts and reports
- Passage plan with ice routing
- Ice class certificate / Polar Ship Certificate
- Training certificates
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.