SeaVint

SIRE 2.0 standard photographs

Before the inspection the operator uploads a set of photographs of the ship. The inspector compares them with what is seen on board (chapter 11), so the photos must show the real, current condition. A photo that looks better than the ship is itself an observation.

How to take them

  • Colour, sharp, landscape, high resolution; JPEG or PNG.
  • Date and time stamped in the picture where possible.
  • No people in the frame.
  • Same view as the standard photo for that position, so they can be compared.
  • Take them in daylight after routine cleaning, not after special painting for the photo.

Avoid

  • Old photos: retake after repairs, repainting or any change in condition.
  • Close-ups that hide rust, leaks or damage next to the frame.
  • Dark engine-room shots and wide-angle distortion.
  • Photos of a sister ship.

The common set

1Bow from dead ahead
Whole bow, both anchors and the bulbous bow line visible; level horizon.
2Forward hull, starboard side
From the quay or a boat: shell plating, draught marks and coating condition.
3Forward hull, port side
As above for the port side.
4Aft hull, starboard side
Shell, draught marks aft, overboard discharges.
5Aft hull, port side
As above for the port side.
6Transom from right astern
Stern, name and port of registry area, rudder top if visible.
7Forecastle, port side looking forward
Deck, fittings and bulwark condition.
8Forecastle, starboard side towards the fairleads
Fairleads, bitts and deck coating.
9Starboard windlass
Windlass, brake band and gypsy, chain stopper.
10Forward main deck: deck and framing
Deck plating and any external framing, coating condition.
11Forward main deck: pipe rack
Pipes, supports, clamps and insulation.
12One mooring winch with the brake setting
Brake, brake band, the marking used for the brake test setting.
13Hose crane, overall view
Whole crane, pedestal and jib rest.
14Hose crane hoisting winch
Winch drum with the wire stowed and the limit switches.
15Starboard manifold looking forward
Manifold, reducers, drip tray, pressure gauges.
16Starboard manifold looking aft
The same manifold from the other side.
17Aft main deck: deck and framing
Deck plating and framing aft.
18Aft main deck: pipe rack
Pipes, supports and insulation aft.
19Poop deck to port with fairleads
From midships towards port, fairleads in view.
20Aft emergency towing equipment, stowage
Stowage of the towing pennant/rope and messenger.
21Aft emergency towing equipment, deployment
Deployment arrangement as it would be used.
22Lifeboat and davit
Boat, falls, davit and release gear area.
23Emergency generator
Generator, switchboard and starting arrangement.
24Engine room general view, top of the main engine
Overall cleanliness, lighting and insulation.
25One generator engine
Whole engine, no leaks, guards fitted.
26Oily water separator / filtering equipment
Separator, 15 ppm monitor and pipework.
27Incinerator
Incinerator and its surroundings.
28One boiler from the front
Burner front and panel.
29One boiler from the top
Top of the boiler showing the controls and mountings.
30Purifier room
General view: housekeeping, no leaks.
31Main engine local control station
Side of the main engine with the local control stand.
32Steering gear room
General view of the compartment.
33Main steering gear
Steering gear unit, pumps and rams.

Depending on the ship type, more views are added, for example the P/V breaker, the inert gas deck seal or non-return valve, a cargo pump or the pump room, and on gas carriers the compressor room.

Chapter 11 questions on the photographs

An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.