ERR 4 — memory error (JOWA SEAGUARD): ko darīt?

Q: ERR 4 — memory error (JOWA SEAGUARD): ko darīt?

Cēlonis: Memory card loose or faulty (corroded contacts). Ko darīt: Check the card and restart; replace the card; if needed, reset by removing the battery for 24 h and set the time

ERR 4 — memory error

JOWA SEAGUARD, 15 ppm tilpnes signalizācija (ows monitors)

Iespējamais cēlonis

Memory card loose or faulty (corroded contacts)

Ko darīt

Check the card and restart; replace the card; if needed, reset by removing the battery for 24 h and set the time

Ražotāja rokasgrāmata, 22. lpp.

Apskatīt mezglu 3D modelī

Citi JOWA SEAGUARD bojājumi

ERR 2 — clock failureHardware failure ERR 8 — sensor not connectedBroken/loose cable or faulty sensor ERR 10 — sensor cleaning requiredNo clean water, dirty sensor, failed auto-flush, air bubbles, faulty sensor ERR 20 — sensor temperatureTemperature outside +1…+60 °C or faulty sensor ERR 40 — log truncatedLog recording interrupted by power failure ERR 80 — unknown errorSoftware failure or no ID in the Information menu PPM: O/R — out of rangeValue outside 0–30 ppm, sample too dirty, faulty sensor

Pēc ražotāja rokasgrāmatas “Manual JOWA SEAGUARD”. Pirms darba pārbaudiet oriģinālu uz kuģa.

Lappuse tulkota automātiski. Detaļu numuri, kodi un lappuses ir kā oriģinālā.