ERR 10 — sensor cleaning required (JOWA SEAGUARD): ko darīt?

Q: ERR 10 — sensor cleaning required (JOWA SEAGUARD): ko darīt?

Cēlonis: No clean water, dirty sensor, failed auto-flush, air bubbles, faulty sensor. Ko darīt: Check the clean water supply, clean the sensor and repeat the flush, check the water, replace the sensor

ERR 10 — sensor cleaning required

JOWA SEAGUARD, 15 ppm tilpnes signalizācija (ows monitors)

Iespējamais cēlonis

No clean water, dirty sensor, failed auto-flush, air bubbles, faulty sensor

Ko darīt

Check the clean water supply, clean the sensor and repeat the flush, check the water, replace the sensor

Ražotāja rokasgrāmata, 22. lpp.

Apskatīt mezglu 3D modelī

Citi JOWA SEAGUARD bojājumi

ERR 2 — clock failureHardware failure ERR 4 — memory errorMemory card loose or faulty (corroded contacts)ERR 8 — sensor not connectedBroken/loose cable or faulty sensor ERR 20 — sensor temperatureTemperature outside +1…+60 °C or faulty sensor ERR 40 — log truncatedLog recording interrupted by power failure ERR 80 — unknown errorSoftware failure or no ID in the Information menu PPM: O/R — out of rangeValue outside 0–30 ppm, sample too dirty, faulty sensor

Pēc ražotāja rokasgrāmatas “Manual JOWA SEAGUARD”. Pirms darba pārbaudiet oriģinālu uz kuģa.

Lappuse tulkota automātiski. Detaļu numuri, kodi un lappuses ir kā oriģinālā.