Westfalia VESC-1

Sterownik wirówki

The Westfalia VESC-1 control unit runs the separation, sludge discharge (partial and total ejection) and displacement programs of a self-cleaning separator and monitors it. Inputs include motor fault, clean-oil outlet pressure switch, feed temperature min/max switches, feed pump control and sludge tank level switches; outputs drive the feed, displacement/filling water and operating water valves, the sludge pump, a collective alarm and a klaxon. The manual and parts list explains the inputs and outputs, programming of times, operation (start, separation stop, separator off), monitoring and alarms, short-circuit and internal fault finding, and the watchdog.

Kliknij część na modelu, aby zobaczyć jej numer i przeznaczenie.Otwórz instrukcję 3D

Procedury obsługi

Stopping separation

1. Press key 0 in separation mode: the unit runs waiting, displacement, waiting after displacement and speed recovery, then ejects with minimum product loss. s. 37
2. Pressing 0 during ejection interrupts the program at once. s. 37
3. If the motor starter is switched off with the feed valve open, a total ejection is made automatically. s. 37

Clearing an alarm

1. Read the fault text on the display (e.g. clean oil outlet, feed temperature). s. 37
2. Eliminate the cause, press Enter to acknowledge, then press I to restart separation. s. 37

Usterki i co robić

Fault clean oil outletNo pressure build-up or pressure drop at the clean oil outletFault feed temperatureFeed outside min/max temperatureSHORT-CIRCUIT TERMINAL 19/39Faulty displacement/filling water valve or wiringDisplay lit but no textEPROM fitted wrong way round or not programmedERROR WATCHDOGControl program reset after abnormal operation

Dane techniczne

Clean oil outlet pressure alarm delay	about 15 s, then feed valve closes	s. 37
Feed temperature alarm delay	about 15 s	s. 37
Feed pump post-running	20 minutes after stop signal	s. 16
Sludge tank level switch delay	5 s	s. 16
Collective alarm contact	closed = normal, open = fault	s. 18

Źródło: instrukcja producenta „EM-21-3 WESTFALIA CONTROL UNIT MODEL VESC-1”, 80 stron. Numery stron według oryginału. Przed pracą sprawdź instrukcję na statku.

Strona przetłumaczona automatycznie. Numery części, kody i strony są jak w oryginale.