10.1.1 Chief Engineer's standing and daily orders
Rotational 1ChemicalLNGLPGOilAsked to: Chief Engineer, Engineer officersWhere: Engine Control Room
Has the Chief Engineer issued written Standing Orders, backed up by Daily Orders, that put the company's engine room management requirements into practical terms, and has every engineer officer signed to confirm they have read and understood them?
In one lineSigned, ship-specific Standing Orders plus daily orders; every engineer has signed and can quote when to call the Chief Engineer.
How to answer
- Explain that the Chief Engineer issues Standing Orders on taking over and that every engineer signs on joining and again when orders are revised
- Name the key contents: watch handover, UMS checks and dead man alarm use, conditions for calling the Chief Engineer, manoeuvring readiness, fuel changeover, bilge/oily water rules, PPE and permits
- Give two or three concrete 'call the Chief' triggers from the orders, e.g. any blackout, abnormal alarm you cannot clear, oil in bilge discharge, pollution risk
- Describe how Daily/Night Orders are used to pass on specific instructions for the coming day or night and that you sign them each time
- State that the orders support, and never override, the company SMS procedures
What the inspector looks for
- Signed Standing Orders exist and are current for this Chief Engineer
- Orders reflect the company SMS (watchkeeping, UMS, when to call the Chief Engineer, bunkering, hot work, enclosed spaces) rather than generic text
- Daily Orders (night order book) are written regularly and are specific to the day's work and plant condition
- Every engineer officer, including recently joined ones, has signed both
- Interviewed engineers can explain the main points without reading them
Have ready to show
- Chief Engineer's Standing Orders with signature sheet of all engineer officers
- Daily/Night Order book with recent entries and signatures
- Company SMS engine room management and watchkeeping procedure
- Crew list to cross-check that every engineer on board has signed
- Engine room log book showing orders being followed (e.g. UMS start/end)
Avoid
- A newly joined engineer who has not signed the Standing Orders
- Orders signed by a previous Chief Engineer and never reissued
- Generic orders copied from the manual with no ship-specific content
- Engineers unable to state when they must call the Chief Engineer
← 9.7.1 Shuttle tanker bow mooring system10.1.2 Testing main propulsion, steering gear, thrusters & power generation plant →
Practise in the interview trainer All questions
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.