SeaVint

11.1.42 One main cargo pump and, if in pump room, including bilges

CoreChemicalOilWhere: Main Deck, Pumproom

Does the operator's submitted photograph No. 42 (a main cargo pump, plus the bilges if that pump sits in a pump room) match what the inspector actually sees on board on the day, and is that area free from anything of concern?

In one lineThe cargo pump matches the photo: no leaks, temperature sensors working and pump room bilges clean and dry.

How to answer

  • Before the inspection, stand at the same viewpoint as the submitted photo and compare it with the area today
  • Explain the pump inspection routine: seal leaks, bearing temperatures and bulkhead seal checks
  • Show that pump room bilges are kept dry and bilge alarms tested
  • If the area has changed since the photo (repairs, new coating, equipment replaced), explain the change and show the record

What the inspector looks for

  • Whether the submitted photo is a true, current picture of the area
  • Pump casing, seals and bearings free of leaks
  • Bulkhead seals and temperature monitoring working
  • Pump room bilges clean and dry
  • Gas detection and lighting working

Have ready to show

  • The submitted photograph and the same viewpoint on board
  • Cargo pump PMS records
  • Pump room gas detection and bilge alarm test records
  • Bearing temperature records

Avoid

  • A photo that shows a better condition than the area actually has on the day
  • Leaking seals or oily bilges
  • Defective gas detection or lighting

Practise in the interview trainer All questions

An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.