SeaVint

4.1.5 Bridge Navigational Watch Alarm System (BNWAS)

Rotational 1ChemicalLNGLPGOilAsked to: Master, Chief Officer, 2nd / 3rd OfficerWhere: Bridge

Do the Master and navigation officers know the company procedure for using the BNWAS, and do records show it was operated and tested according to that procedure?

In one lineBNWAS on at sea, key with Master; alarm stages known; tested and logged; on stage 2 alarm go straight to the bridge.

How to answer

  • Explain that BNWAS must be on whenever the ship is underway at sea and the controls are restricted to the Master
  • Describe the alarm sequence: visual on bridge, audible on bridge, then alarm to the Master/back-up officer and further locations
  • Demonstrate the test and show the test records
  • Explain your action on a stage 2 alarm: go to the bridge at once and check the OOW's condition and the navigational situation

What the inspector looks for

  • How BNWAS is switched on and off and who controls the key
  • Operating mode (automatic, manual on, off) used at sea and in port
  • Dormant period setting and alarm stages
  • Testing frequency and records
  • Actions on receiving a second-stage alarm in the cabin

Have ready to show

  • BNWAS panel and key control
  • BNWAS test records
  • Logbook entries for switching on/off
  • Master's standing orders on BNWAS

Avoid

  • BNWAS switched off at sea
  • Officers unclear on alarm stages or response
  • Testing not recorded

Practise in the interview trainer All questions

An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.