SeaVint

4.1.6 Global Navigation Satellite System(s)

Rotational 2ChemicalLNGLPGOilAsked to: Master, Chief Officer, 2nd / 3rd OfficerWhere: Bridge

Do the Master and navigation officers know the company procedures for managing and operating the GNSS receivers fitted on board, and are these receivers set up, used and checked according to the procedures?

In one lineGNSS correctly configured, cross-checked with radar/visual fixes, and I know how to spot jamming or spoofing.

How to answer

  • Explain which receiver feeds which equipment and how to switch to the secondary
  • Show the datum and confirm it matches the chart datum used in ECDIS
  • Explain how GNSS positions are cross-checked with radar or visual fixes at the required interval
  • Explain how you would recognise and respond to GNSS jamming or spoofing

What the inspector looks for

  • Correct datum (WGS 84), antenna position and output configuration
  • Primary/secondary receiver selection and inputs to ECDIS, radar, AIS
  • Checks against independent position fixing (radar, visual)
  • Alarm settings (loss of fix, HDOP) and awareness of GNSS interference/spoofing

Have ready to show

  • GNSS receivers and settings menu
  • Position cross-check records in logbook
  • GNSS procedure in SMS
  • Manufacturer's manual

Avoid

  • Wrong datum or configuration
  • No independent cross-checks
  • Officers unaware of GNSS vulnerabilities

Practise in the interview trainer All questions

An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.