6.2.2 Cargo system overboard and sea suction valves
Rotational 2ChemicalOilAsked to: Master, Chief Officer, 2nd / 3rd OfficerWhere: Cargo Control Room, Main Deck, Pumproom
Before any cargo transfer, are the overboard discharge and sea suction valves connected to the cargo system confirmed shut and secured, and, where a test arrangement is fitted between the valves, is it used regularly to check for leaks?
In one lineCargo-system sea and overboard valves closed, sealed and logged before transfer; the space between double valves regularly checked for leaks.
How to answer
- Explain that before cargo or ballast operations the cargo officer checks every cargo-system sea and overboard valve is closed, secured and sealed, and records the seal numbers
- Show how the space between the two sea valves is checked for leakage using the test cock or gauge, how often, and where it is recorded
- If cargo tanks are ever ballasted from the sea chest, describe the company sequence that prevents oil going overboard: the pump is started and drawing from sea before the tank valves are opened, under the C/O's supervision, and there is no gravity loading through dirty lines
- For line displacement with sea water, describe the planning, the line-up checked by two people, the pump pressure monitoring and closing the sea valves straight afterwards
- Explain that any passing valve is reported and repaired, and the system is not used until it is fixed
What the inspector looks for
- Sea and overboard valves on the cargo system closed and lashed or sealed before cargo operations, with seal numbers recorded
- A pre-cargo checklist entry confirming the valves were checked
- Test cocks or pressure gauges between the double valves checked for leakage, with records
- Officers who know how to use the sea chest safely for ballasting cargo tanks or for line displacement
- No signs of leakage or passing valves
Have ready to show
- Sea valve seal log with seal numbers
- Pre-arrival and pre-transfer checklists, and the ISGOTT ship/shore safety checklist
- Leak test records for the double sea valves
- Cargo and ballast system line drawings
- Cargo operation plan showing the line-up
Avoid
- Sea valves found unsealed or not recorded before cargo operations
- Test cocks blocked or never checked
- No documented procedure for ballasting through cargo lines
- Oil sheen seen around the sea chest overboard area
← 6.2.1 Flooding or accidental leakage of cargo pumproom bilges6.2.3 Bunker pipeline system pressure testing →
Practise in the interview trainer All questions
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.