8.3.18 Inert gas system pressure/vacuum-breaking (P/V) device(s)
Rotational 2ChemicalOilAsked to: Master, Chief Officer, 2nd / 3rd OfficerWhere: Cargo Control Room, Main DeckOnly if it applies to the ship
Can the Master and officers explain what the P/V breaker on the IG main is for, how it works and how it is tested and maintained, and is it in good condition?
In one lineP/V breaker is the back-up for P/V valves; keep the liquid level and antifreeze correct and record checks.
How to answer
- Explain the purpose: a back-up protection that opens at a pressure or vacuum beyond the P/V valve settings.
- Describe how you verify the liquid level, using the sight glass or dipstick, and check the antifreeze concentration where applicable.
- State the set pressure and vacuum and how they compare with P/V valve and alarm settings.
- Explain the maintenance done per PMS: draining, cleaning, refilling and checking for corrosion.
- Describe actions if it has operated: investigate the cause, refill and inspect before resuming.
What the inspector looks for
- Crew knowledge that the P/V breaker protects tanks against excessive pressure or vacuum if P/V valves fail
- Liquid level and density of fill (water/antifreeze mixture) and how they are checked
- Set points relative to P/V valve settings
- Inspection and maintenance records
Have ready to show
- P/V breaker maintenance and level check records
- Maker's manual with filling instructions
- Settings list for P/V valves, P/V breaker and alarms
- IGS diagram
Avoid
- Wrong liquid level or no antifreeze in cold climate
- Crew unable to say how the level is checked
- No inspection record
Practise in the interview trainer All questions
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.