8.5.4 Cold spots and cofferdam temperature monitoring and heating equipment
Rotational 2LNGAsked to: Master, Chief Officer, 2nd / 3rd OfficerWhere: Cargo Control Room, Engine Room, Main Deck
Do the Master and officers know the company procedures for keeping hull steel safe from very low cargo temperatures, and are the hull temperature monitoring and cofferdam heating systems, where fitted, in good condition?
In one lineMonitor hull temperatures, keep cofferdam heating and standby running, report any cold spot to company and class at once.
How to answer
- Explain why hull steel must stay above the temperature its grade is designed for and how the monitoring system shows this.
- Describe the cofferdam heating system: heaters, circulation pumps, standby units and how they are tested.
- Describe cold spot actions: confirm with portable instruments, increase heating locally, increase monitoring, report to the Master, company and class, and follow the Cargo System Operation Manual.
- Explain heating failure actions: start the standby unit, monitor temperatures more often, report and repair.
- Show temperature records.
What the inspector looks for
- Inner hull and cofferdam temperature sensors and alarm settings
- Cofferdam heating (e.g. glycol water) system operation and standby capacity
- Temperature records and trends, especially in cold sea and air conditions
- Actions on a cold spot or heating failure
Have ready to show
- Hull and cofferdam temperature records
- Cofferdam heating system log
- Alarm test records
- Cargo System Operation Manual
- Defect reports
Avoid
- Cold spot not reported
- Heating failure not acted on
- No temperature records
Practise in the interview trainer All questions
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.