8.7.9 Gas and fire detection systems in the bow loading system (BLS) area
Rotational 2OilAsked to: Master, Chief Officer, 2nd / 3rd OfficerWhere: Bow Loading Area, Bridge, Cargo Control RoomOnly if it applies to the ship
Do the Master and officers know where the gas detectors and fire detectors covering the bow loading area are, what they do and how they work, and are they in good order, regularly tested, maintained and calibrated?
In one lineKnow BLS gas and fire detector locations and alarm actions, calibrate and test them per PMS, stop loading on alarm.
How to answer
- Explain where the detectors are and what they monitor.
- Describe the alarms and automatic actions, and your response: stop loading, investigate, ESD if needed.
- Explain how gas detectors are calibrated and fire detectors tested, and show records.
- Describe what you do if a detector is faulty.
What the inspector looks for
- Locations of hydrocarbon gas and fire detectors in the BLS area
- Where alarms show (bridge, CCR) and any automatic actions such as ESD or deluge activation
- Calibration records of gas detectors with span gas
- Test records of fire detectors
Have ready to show
- Gas and fire detection panel
- Calibration certificates and span gas
- Test records
- PMS records
- Cause-and-effect matrix
Avoid
- Gas detectors overdue for calibration
- Fire detectors not tested
- Faulty detectors not reported
On SeaVint
Practise in the interview trainer All questions
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.