8.7.8 DP FMEA
Rotational 2OilAsked to: Master, Chief Officer, 2nd / 3rd OfficerWhere: Bridge, Chief Engineer's Office, Documentation, Engine Control RoomOnly if it applies to the ship
Do the Master and officers know the DP FMEA of their ship, is the newest version on board, and have any changes made to the DP system been included in it?
In one lineLatest FMEA on board including modifications; know worst-case failure, thruster fail-safe modes and closed bus risks.
How to answer
- Explain what the FMEA is and the worst-case failure it identifies.
- Describe actions for typical failures, such as loss of one switchboard, a thruster or a position reference.
- State the fail-safe mode of each thruster type on board.
- Explain the risks of closed bus tie operation and the protection required.
- Show the latest revision and confirm modifications are included.
What the inspector looks for
- Latest revision of the FMEA on board and accessible to DP operators
- Knowledge of actions after a given system or sub-system failure
- Thruster fail-safe modes: fail as set, fail to zero thrust, propeller stop
- Failure modes when running with closed bus tie breakers
- Inclusion of modifications made since the last revision
Have ready to show
- DP FMEA (latest revision)
- FMEA proving trials report
- DP operations manual and activity-specific operating guidelines
- Modification records
Avoid
- Outdated FMEA or modifications not included
- Officers unaware of failure modes or thruster fail-safe states
- FMEA not accessible on the bridge
← 8.7.7 DP Equipment condition and maintenance8.7.9 Gas and fire detection systems in the bow loading system (BLS) area →
Practise in the interview trainer All questions
An independent guide written by seafarers for seafarers. It is not affiliated with or endorsed by OCIMF and does not reproduce the SIRE 2.0 Question Library: questions are put in our own words. The official library and guidance are published by OCIMF (ocimf.org). Always follow your company's SMS.