SeaVint

Zhenjiang PD10

Pneumatic accommodation ladder winch

Air-driven winch for hoisting and lowering the accommodation ladder, a short-time duty machine. A flanged air motor drives a split drum for two ropes through a reduction gear with a ratchet brake that limits the lowering speed; a hand crank on the gearbox shaft works it when there is no air, and a limit valve cuts the air while the crank is out. The manual covers readiness checks, operation with the three-position change valve, lubrication, rope renewal and opening the gearbox.

Нажмите на деталь на модели — увидите номер и назначение.Открыть 3D-мануал

Обучающие видео

How an accommodation ladder winch works: air motor, brake, hand crank (Zhenjiang PD10)▶ YouTube Shorts

Процедуры обслуживания

Readiness for operation

  1. All operators must know the construction of the winch. стр. 11
  2. The rope must leave the drum as on the general drawing; never wind it the wrong way. стр. 11
  3. Check all connections for looseness, especially the rope end on the drum and the foundation bolts; check the brake. стр. 11
  4. Clear any obstacles round the winch. стр. 11
  5. Check the air fittings, pipes and air motor. стр. 11
  6. Renew a rope with ten broken wires in 1 m or with reduced diameter. стр. 11
  7. Check the oil level between the dipstick marks. стр. 11
  8. Check the manual handle is stowed and the limit switch is reliable. стр. 11

Operating the winch

  1. Pull out the pin on the accommodation ladder. стр. 11
  2. Move the three-position change valve handle to lower, stop, hoist or capsize the ladder. стр. 11
  3. To work by hand, keep the change valve in the middle, insert the handle on the square shaft end of the gearbox and crank. стр. 12

Opening and reassembling the gearbox

  1. Unscrew the drain plug at the bottom of the gear box, drain the oil and remove the air motor. стр. 12
  2. Strip the bolts of the big cover plate and pull it off together with the high-speed gear shaft; take out the bearings. стр. 12
  3. Remove the big gear, ratchet and brake disc of the second stage in order. стр. 12
  4. Reassemble in reverse order. стр. 12
    Check the ratchet tooth direction; do not strip the ratchet unless necessary
  5. Refit only if the brake works without slipping. стр. 12

Интервалы технического обслуживания

ЧтоКогдаЧто делатьМануал
Gear box oilafter the first 50 hRenew all oil and flush the caseстр. 12
Gear box oilyearlyChangeстр. 12
Wire ropesregularlySmear with calcium base grease ZG-3стр. 12
SealsregularlyReplaceстр. 12
Rope end on drum and foundation boltsoftenCheck they are secureстр. 12

Технические характеристики

Rated load2 × 5 kNстр. 13
Holding load2 × 5 kNстр. 13
Rated hoisting speed0.14 m/sстр. 13
DrumØ230 × (91 + 91) mmстр. 13
Winding layers3стр. 13
Wire capacity2 × 15 mстр. 13
Wire rope6 × 37 – Ø13 mm, 1700 MPaстр. 13
Transmission ratio (air motor)75.43стр. 13
Transmission ratio (manual)30.73стр. 13
Total efficiency0.80стр. 13
Air motorJFH 1/24, 4.41 kW, 890 r/minстр. 13
Air consumption5.0 m³/minстр. 13
Working pressure0.6 MPaстр. 13
Overall dimensions982 × 350 × 600 mmстр. 13
Weight390 kgстр. 13
Gear oilN46 mechanical oil, about 5 L first fillстр. 12
Rope greasecalcium base grease ZG-3стр. 12
StandardsISO 7364, GB1392-85стр. 10

Запчасти и номера по каталогу

ДетальНомерКол.Мануал
Spring241ZF200-01-131стр. 16
Ball bearing 6005GB/T276-944стр. 16
Ball bearing 6205GB/T276-941стр. 16
Oil seal PD25×40×10HG4-692-671стр. 16
Oil cup M10×1GB1152-841стр. 16
O-ring 14×2.4GB1235-762стр. 16
Washer 34×3.5GB1235-764стр. 16
Combined washer 33JB982-774стр. 16
Air control station241ZF213P1-05-02стр. 15

Источник: мануал производителя «PD10 pneumatic accommodation ladder winch», 34 стр. Номера страниц указаны по оригиналу. Перед работой сверяйтесь с мануалом на судне.

Страница переведена автоматически. Номера деталей, коды и страницы — как в оригинале.